Installing White Canopy Bed Curtain
Installing White Canopy Bed Curtain – Canopy Beds are made specifically for the installation curtains, so hang curtains on the canopy bed frames are easy. However, you can turn any bed into a four-poster bed by installing curtain rods and hanging curtains. Install curtains to your white canopy or bed frame can give a romantic appeal for your bedroom.
Measure length and width your bed to install white canopy bed curtain. If you have a canopy bed, measure the distance between the posts. Measure the distance between ceiling and floor or into the bedposts at the floor. This will give you the size you need for the length of the curtains. For beds without posts, you will be installing curtain rods on the ceiling, so you need curtain panels that extend between the ceiling and the floor. Purchase curtains long enough to reach to the floor from its mounting location. Buy enough matching curtain panels to fill in the spaces between the bedposts or to match the length and width of the bed. Buy some extra panels to ensure the curtains spread out nicely between the poles and around the bed.
12 Photos Gallery of: Installing White Canopy Bed Curtain
Use the length and width measurements from the past to measure where the brackets for white canopy bed curtain rods will be placed. Mark brackets designated places with small pencil marks. Stand on the ladder and use a screwdriver to install the curtain rod bracket to the ceiling or bedposts. You will need to mount at least six of the console do three curtain wall at the bottom and two sides of the bed; except the bed sits in the middle of the room, where you will need four curtain walls. Slide the curtain panels with the required amount for each curtain rods. Adjust the curtain rod to the necessary size and push the ends of the curtain rod on or in the mounting brackets on the ceiling or bedposts. Spread the curtain panels out to see the panels provide sufficient coverage. Add more panels if needed.